Denver Instrument Summit Operations Instructions download pdf (Page 50)

50

Recycling

Safety Inspection

If there is any indication that safe operation

of the balance is no longer warranted:

§ Turn off the power and disconnect the

equipment from AC power immediately.

> Lock the equipment in a secure place

to ensure that it cannot be used for the

time being.

Notify your nearest Denver Service Center.

Repair work must be performed by trained

service technicians.

We recommend having the power supply

inspected by a certified electrician at regular

intervals, according to the following check-

list:

– Insulating resistance: > 7 megaohms

measured with a constant voltage of at

least 500 volts at a 500 K-ohm load

– Leakage current: < 0.05 mA measured

with a properly calibrated multimeter

Information and Instructions on

Disposal and Repairs

Packaging that is no longer required must

be disposed of at the local waste disposal

facility. The packaging is made of environ-

mentally friendly materials that can be used

as secondary raw materials.

The equipment, including acces-

sories and batteries, does not

belong in your regular household

waste. The EU legislation

requires its Member States to

collect electrical and electronic

equipment and disposed of it separately

from other unsorted municipal waste with

the aim of recycling it.

In Germany and many other countries,

Denver Instrument takes care of the return

and legally compliant disposal of its electri-

cal and electronic equipment on its own.

These products may not be placed with the

household waste or brought to collection

centers run by local public disposal opera-

tions – not even by small commercial

operators.

For disposal in Germany and in the other

Member States of the European Economic

Area (EEA), please contact our service tech-

nicians on location or our Service Center in

Goettingen, Germany:

Denver Instrument GmbH

Robert-Bosch-Breite 10

37079 Goettingen, Germany

In countries that are not members of the

European Economic Area (EEA) or where

no Denver affiliates, subsidiaries, dealers or

distributors are located, please contact your

local authorities or a commercial disposal

operator.

Prior to disposal and/or scrapping of the

equipment, any batteries should be removed

and disposed of in local collection boxes.

Denver, its affiliates, subsidiaries, dealers

and distributors will not take back equip-

ment contaminated with hazardous materi-

als (ABC contamination) – either for repair

or disposal. Please refer to the accompany-

ing leaflet/manual or visit our Internet web-

site (www.denverinstrument.com) for com-

prehensive information that includes our

service addresses to contact if you plan to

send your equipment in for repairs or proper

disposal.

1 ... 49 50 51 ... 108

Comments to this Manuals

No comments