Denver Instrument Summit Operations Instructions download pdf (Page 49)

49

Care and Maintenance

Service

On request, Denver Instrument can provide

you with individual service information.

Repairs

Repair work must be performed by trained

service technicians. Any attempt by untrained

persons to perform repairs may result in

considerable hazards for the user.

Cleaning

§ Unplug the AC adapter from the wall outlet

(mains supply). If you have an interface

cable connected to the balance port, unplug

it from the port.

! Do not used solvents or aggressive cleaning

agents on the following parts: keypad over-

lay, power jack, data interface

§ After cleaning, wipe down the balance with

a soft, dry cloth.

On analytical balances remove and clean the

weighing pan as follows:

§ Reach beneath the drip/breeeze and lift

it carefully, together with the pan support,

to avoid damaging the weighing system.

! Make sure that no liquid enters the balance

housing.

Cleaning Stainless Steel Surfaces

Clean all stainless steel parts regularly.

Remove the stainless steel weighing pan and

thoroughly clean it separately. Use a damp

cloth or sponge to clean stainless steel parts

on the balance. You can use any household

cleaning agent that is suitable for use on stain-

less steel. Clean stainless steel surfaces only

by wiping them down. Then rinse the equip-

ment thoroughly, making sure to remove all

residues. Afterwards, allow the equipment to

dry. If desired, you can apply oil to the cleaned

surfaces as additional protection.

1 ... 48 49 50 ... 108

Comments to this Manuals

No comments