Denver Instrument Summit Operations Instructions download pdf (Page 48)

Troubleshooting Guide

Error codes are shown on the main display for approx. 2 seconds. The program then

returns automatically to the previous mode.

Display Cause Solution

No segments appear No AC power is available Check the AC power supply

on the display

The power supply is not Plug in the power supply

plugged in

high The load exceeds the balance Unload the balance

capacity

low or Err 54 Something is touching Move the object that is

the weighing pan touching the weighing pan

err 54, typical Weighing system defect Contact Denver Service Center

App.err. Cannot store data: Increase load

Load on weighing pan too

light or no sample on pan

while application is active

dis.err. Data output not compatible Change the configuration in

with output format the operating menu

prt.err. Interface port for printer Reset the menu factory settings,

output is blocked or

Contact your local Denver

Service Center

err 02 Calibration parameter Calibrate only when zero

not met; e.g.: is displayed

– balance not tared – Press t to tare the balance

– load on weighing pan – Unload the balance

err 10 The t key is blocked when Press to clear the tare

there is data in the second tare memory and release the tare key

memory (net-total); only 1 tare

function can be used at a time

err 11 Tare memory not allowed Press t

The weight readout Unstable ambient conditions Set up the balance in another

changes constantly (excessive vibration or draft) area

at the place of installation

A foreign object is caught Remove the foreign object

between weighing pan and

balance housing

The weight readout The balance was not Calibrate/adjust the balance

is obviously wrong calibrated/adjusted

Balance not tared Tare or zero the balance

before weighing before weighing

If any other errors occur, contact your local Denver Service Center.

Contact information: http://www.denverinstrument.com

CLEAR

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 107 108

Comments to this Manuals

No comments

Denver Instrument Summit Operations Instructions Page 48

Comments to this Manuals

Related products and manuals for Kitchen scales Denver Instrument Summit