Denver Instrument PK-Series Specifications download pdf (Page 12)

Memory Function

All PK-Series balances include a unique memory function that allows

cumulative weighing up to the capacity of the balance. Using the memory

function requires the following steps:

1. After making sure that the balance is on, start by pressing the

“TARE/PRINT” key to tare the balance out to zero.

2. Place a sample on the pan, and when the displayed weight is stable,

briefly press the “ON/MEMORY” key. An arrow appears on the upper

left side of the display. This action adds the displayed weight value to

the value contained in memory buffer, which is initially set to zero, and

re-tares the balance so the LCD once again reads “0” (zero).

3. Repeat #2, above, as many times as you want until you are ready to see

the cumulative weight of all samples weighed.

4. To view the cumulative weight, press and hold the “ON/MEMORY” key

until a beep is heard. When the beep sounds, the memory buffer is

dumped to the LCD and the total sum of everything weighed is visible.

This also clears out the memory buffer and re-initializes it to zero.

5. Briefly press “TARE/PRINT” key in order to tare out the balance, and you

are ready to proceed with normal weighing operation..

If you begin using the memory function, and decide that you do

not need to do cumulative weighing at the moment, perform #4 &

5 above to jump out of the memory function mode.

You cannot switch weighing modes after beginning to use the

memory function. If you want to do cumulative weighing using a

different weighing mode, like pennyweight (dwt), switch to that

weighing mode first, before invoking the memory function.

Memo:

Note:

Memo:

Note:

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 21 22

No comments

Denver Instrument PK-Series Specifications Page 12